Closed Cell Blend Polyol Insulation Foam System for Construction

Closed Cell Blend Polyol Insulation Foam System For Construction Building Wall Spray Rigid PU Foam DESCRIPTIONSDA21G building wall insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of building external wall. It used together with Isocyanate(PM-200) to m

Featured Products

Closed Cell Blend Polyol Insulation Foam System For Construction 

Building Wall Spray Rigid PU Foam 
DESCRIPTION
SDA21G building wall insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of building external wall. It used together with Isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:
  1. Zero ozone depleting blowing agent 
  2. The strong adhesive force, convenient construction and no seams.
  3. The low thermal conductivity, low water absorption and good dimensional stability.
  4. The long service life.
TYPICAL PHYSICAL PROPERTIES
Physical Properities Test MethodMetricValue
Core DensityGB/T 6343-2009kg/m343.3
Compressive StrengthGB/T 8813-2008kPa244
Tensile StrenghtGB/T 9641-88kPa256
Oxygen indexGB/T 2406.2-2009%28.5
Initial Thermal ConductivityGB/T 10294-2008W/(M·K)0.023
Close Cell ContentGB/T 10799-2008%≥90
Water AbsorptionGB/T 8810-2005%≤3
Dimensional Stability
(Foam made After 6 days)
-25ºCGB/T 8811-2008%≤1
≤1
70ºC
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com 
Or please contact us for information:
 
 

Closed Cell Blend Polyol Insulation Foam System For Construction 

Building Wall Spray Rigid PU Foam 
DESCRIPTION
SDA21G building wall insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of building external wall. It used together with Isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:
  1. Zero ozone depleting blowing agent 
  2. The strong adhesive force, convenient construction and no seams.
  3. The low thermal conductivity, low water absorption and good dimensional stability.
  4. The long service life.
TYPICAL PHYSICAL PROPERTIES
Physical Properities Test MethodMetricValue
Core DensityGB/T 6343-2009kg/m343.3
Compressive StrengthGB/T 8813-2008kPa244
Tensile StrenghtGB/T 9641-88kPa256
Oxygen indexGB/T 2406.2-2009%28.5
Initial Thermal ConductivityGB/T 10294-2008W/(M·K)0.023
Close Cell ContentGB/T 10799-2008%≥90
Water AbsorptionGB/T 8810-2005%≤3
Dimensional Stability
(Foam made After 6 days)
-25ºCGB/T 8811-2008%≤1
≤1
70ºC
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com 
Or please contact us for information:
 
 

Closed Cell Blend Polyol Insulation Foam System For Construction 

Building Wall Spray Rigid PU Foam 
DESCRIPTION
SDA21G building wall insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of building external wall. It used together with Isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:
  1. Zero ozone depleting blowing agent 
  2. The strong adhesive force, convenient construction and no seams.
  3. The low thermal conductivity, low water absorption and good dimensional stability.
  4. The long service life.
TYPICAL PHYSICAL PROPERTIES
Physical Properities Test MethodMetricValue
Core DensityGB/T 6343-2009kg/m343.3
Compressive StrengthGB/T 8813-2008kPa244
Tensile StrenghtGB/T 9641-88kPa256
Oxygen indexGB/T 2406.2-2009%28.5
Initial Thermal ConductivityGB/T 10294-2008W/(M·K)0.023
Close Cell ContentGB/T 10799-2008%≥90
Water AbsorptionGB/T 8810-2005%≤3
Dimensional Stability
(Foam made After 6 days)
-25ºCGB/T 8811-2008%≤1
≤1
70ºC
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com 
Or please contact us for information:
 
 

Closed Cell Blend Polyol Insulation Foam System for Construction
Closed Cell Blend Polyol Insulation Foam System for Construction
Closed Cell Blend Polyol Insulation Foam System for Construction
Closed Cell Blend Polyol Insulation Foam System for Construction

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours