MS 800 Consistent Cure Flexible Adhesives MS Polymers Sealant
1. Eco friendly, no odor, low VOC, very safe.
2. No shrinkage after full dry.
3. Excellent adhesion, suitable for all kinds of coatings and wood.
4. Excellent water resistance, resist the rain wash, it could be used for the outside of tanks.
5. Fast cure, faster cure speed than other sealants when in cold weather.
6. Excellent weatherproofing, performs well in all kinds of weather.
One single-component, high-performance sealant based on advanced MS Polymer technology. It is solvent, silicone, and isocyanate free. It is excellent in UV, weather, and temperature resistance. Its adhesion over a wide variety of substrates is very good, and is paintable with most types of common industrial paints.
• Joint seals of prefabricated building balconies
• Waterproof and leak-proof seal for building roofs
• Sealing and bonding of flashing, gutter, wall cladding
• Caulking and Sealing of interior joints
• Many other industrial and architectural uses
• Joint seals of prefabricated building exterior wall
Instructions of use
1.Clean and dry the substrate' surface first of all.
2.Cut the nozzle and press glue gun ,balance the glue to the both sides,ensure to full the joint.
We are professional silicone sealant supplier with 16 years experience.
Our factory founded in 2006. Now, we are NO.7 silicone sealant manufacturer in China:
1/ Located in Quzhou city of Zhejiang province in China.
2/ Factory area: 200000 square meters
3/ Registered capital:200000000RMB. Total investment: 800000000RMB.
4/ Workers: More than 500.
5/ Annual output value: 100000 ton.
6/ Equipment:100000 ton organic silicon monomer device;30000 ton 107 glue device; 30000 ton 110 glue device; 3200 ton gas white carbon black device and so on.
7/ Cooperate philosophy: Integrity, pragmatic, synergy.
8/ Mission: Create a beautiful home.
300ml *24cartridges/carton; or 590ml *20sausages/carton; or as request
Transport and storage
This product is flammable but not explosive, and can be delivered by normal means of transportation.
The products must be stored under 27 degree, in the cool and dry place.
It has no toxicity after entirely cured. Avoid eye contact it when operating. If happened, rinse opened eye under running water for several minutes. During the curing process, sealant will release a small amount of organic molecules. Construction should ensure good ventilation. If necessary, take protective measures. Please keep out of reach of children.
Await your enquiry, you may get super suprise from us!