1. Withstands temperatures up to 230 ° c
2. Recommended for bolts up to m36. Heating and hand tools required for disassemble.
3. Provides a fast cure on most surfaces, including's received fasteners without being cleaned
Technical data sheet
Product number container(ml) color viscosity(MPa. S) prevail torque(n. M) break torque(n. M) gap fill(mm) temperature range(° c) fixture time/full cure time 222 10/50/250 purple 1200/5000
Thixotropic 4.0 6 0.13 -50- 150 20min/24hrs 242 10/50/250 blue 1200/6000
Thixotropic 4.8 12 0.13 -50- 150 20min/24hrs 243 10/50/250 blue 2250/8000
Thixotropic 7.0 20 0.13 -50- 150 20min/24hrs 262 10/50/250 red 1800/5000
Thixotropic 22 22 0.13 -50- 150 20min/24hrs 271 10/50/250 red 500 31 25 0.13 -50- 150 20min/24hrs 272 10/50/250 red 6000 25 23 0.25 -50- 230 30min/24hrs 277 10/50/250 red 7000 32 32 0.25 -50- 150 30min/24hrs 290 10/50/250 green 12 29 10 0.10 -50- 150 20min/24hrs
222 threadlocking adhesive low strength, thixotropic viscosity., suitable for most metal surfaces, parts can be disassemble with hand tools. Ideals for fasteners diameters of m6 and smaller, controlled lubricity can attain accurate clamp loads.
242 threadlockong adhesive medium strength general purpose, thixotropic viscosity. For locking and sealing m6-m20 threads. Parts can be separated using hand tools, controlled lubricity, can attain accurate clamp loads.
243 threadlocking adhesive oil resistant, medium strength fast curing, used on inert surface, improved oil tolerant, easy to disassemble, can be applied on surfaces with oil for fasteners smaller than m20
262 threadlocking adhesive medium to high strength thixotropic viscosity, excellent chemicals resistance. Suitable for most metal surfaces, for fasteners smaller than m20. A permanent threadlocker, excellent for preventing rust and corrosion in extreme chemical/environmental conditions.
271 threadlocking adhesive high strength, low viscosity. For permanent locking and sealing, fasteners smaller than m36 heating and tools required for disassemble.
272 threadlocking adhesive high temperature, high strength withstands temperatures up to 230 ° c for locking and sealing the thread of cylinder. Provides a fast cure on most surfaces, including the parts without being cleaned recommended for bolts up to m36. Heating and hand tools required for disassemble
277 threadlocking adhesive high strength high viscosity, excellent chemicals resistance. For permanent locking and sealing bolts up to m36 prevent rust and corrosion of threaded fasteners. Heating and hand tools required for disassemble.
290 threadlocking adhesive wicking grade medium strength, low viscosity, fast curing. For locking and sealing pre-assembled bolts m2-m12. Also for sealing welds and porous metal parts. Prevent rust and corrosion. Heating and tools required for disassemble.